Home
Hardware
Configurator
Services
OEM Guides About us Warranty Contact
ESENDEFRITPT
Rugged · Tests

Rugged computer: what MIL-STD-810H and IP65 mean and when they are really needed

“Rugged” appears on many datasheets and means something different on each. This guide explains what lies behind the two most quoted labels, how to read a test report and in which cases it is worth paying the difference.

ACD&CO technical team7 November 20266 min read

MIL-STD-810H: a collection of test methods, not a certificate

MIL-STD-810H is a United States Department of Defense standard that describes environmental test methods: each method has a number and several procedures and levels. The ones that matter for a computer are vibration (method 514), shock (516), high and low temperature (501 and 502), humidity (507), dust and sand (510) and rain (506).

There is no such thing as a “MIL-STD-810H certificate”. What exists is a test report stating which methods were applied, with which procedure and at which levels. Always ask for it: “MIL-STD-810H compliant” without a report says nothing.

IP65, IP67: what gets in and what does not

The IP code has two digits: the first, 0 to 6, is protection against dust (6 means dust-tight) and the second against water (5, jets; 6, powerful jets; 7, temporary immersion). IP65 is usual for units that are hosed down or work outdoors; IP67 only if the unit may end up submerged. An IP65 unit has no fans or grilles: it dissipates through the housing, so its power is limited.

When it is needed and when it is not

It is needed outdoors, in vehicles, on machines that vibrate, in dusty halls, where water is used for cleaning or where temperature changes sharply. It is not needed in an air-conditioned electrical cabinet or a control room: there a well-built industrial unit, with extended-range components and tested for 24 hours, holds up just as well and costs considerably less.

The right question is not “do I want it rugged?” but “what will happen to it?”. With the list of stresses (vibration, water, dust, temperature, impacts) you choose exactly the right level of protection.

What it costs and why

A rugged unit costs more because of the housing (machined or cast aluminium, gaskets, locking connectors), the extended temperature range components, the conformal coating on the boards and the tests, which are paid once per platform. In return, the power is lower than that of a ventilated unit of the same size.

How we test it

In our laboratory we subject the platform to vibration, shock and thermal cycling following the MIL-STD-810H methods each project requires, and every unit runs 24 hours at full load inside its final enclosure. We deliver the test report with the methods and levels applied and the laboratory certificate for each unit.

Indicative level of protection by environment
EnvironmentProtectionForm factor
Electrical cabinet or air-conditioned control roomIndustrial, no special testsFanless box PC or ventilated compact unit with a filter
Dusty hall, machine vibrationMIL-STD-810H vibration and shock, IP5xFanless compact unit in an aluminium housing
Vehicle or mobile machineryVibration, shock and temperature, 9 to 36 VVehicle compact unit with ignition start
Outdoors, washed with water, saltIP65 or IP67, coated boards, extended temperatureSealed conduction-cooled unit, M12 connectors

Frequently asked questions

Is there a MIL-STD-810H certificate?

No. The standard describes test methods; what is delivered is a report stating which methods, procedures and levels were applied. Ask for it before buying.

What is the difference between IP65 and IP67?

IP65 withstands dust and water jets; IP67 also temporary immersion. For most industrial and outdoor uses IP65 is enough; IP67 only if the unit may end up under water.

Is a rugged unit less powerful?

Yes, for the same size: without fans, the heat leaves only through the housing, so low-power processors and small GPUs are used. If a lot of power is needed in a harsh environment, a powerful unit in a protected cabinet is combined with rugged sensors outside.

Can you ruggedise a custom unit?

Yes. We choose the platform, the housing and the extended-range components according to the project’s stresses, test it in our laboratory and deliver the report and the certificate for each unit.

Where will your computer work?

Tell us the location, the power available and what it has to do. We will propose the compact unit, with tests and a price, within 12 working hours.

Ask for a proposal

A proposal within 12 working hours

Tell us what you need

Tell us what it is for and we will reply with a configuration and its price. If you already have a quote from another brand, send it over and we will prepare the equivalent.

  • A written reply within 12 working hours
  • A single point of contact, from quote to warranty
  • No obligation: we only use your details to reply

+34 613 17 68 06info@acdcompany.es

This field is required.
Check the email: something is missing.

Or call us: +34 613 17 68 06