The four form factors and where each one goes
A fanless box PC goes inside the electrical cabinet, on a DIN rail or bolted to the back plate: no moving parts, no filters to clean and all the wiring on one side. It is the format of most machines with classic vision, process control or data logging.
A panel PC combines computer and touch screen in one front, with IP protection on the visible face; it fits when the operator stands in front of the machine. A compact unit with a GPU is needed for deep learning, several cameras or heavy video. And a tower in the control cabinet when the software needs a full workstation: in-line simulation, a digital twin or several graphics cards.
Power and start-up: 24 V, outages and watchdog
Most cabinets supply 24 V DC, so the machine must accept a wide range (9 to 36 V is usual) and tolerate the spikes from motors and contactors starting. Ask for automatic start when power returns, so the machine does not depend on someone pressing a button.
A hardware watchdog restarts the computer if the software hangs, and a small battery or a 24 V UPS lets the system shut down cleanly during an outage. Three lines in the specification that avoid most maintenance visits.
Inputs, outputs and fieldbuses: talk to what you already have
List everything the computer must connect to: digital inputs and outputs (trigger a camera, open a valve), RS-232 or RS-485 serial ports for scales, readers or drives, and the machine bus: Profinet, EtherNet/IP, Modbus TCP or OPC UA. Almost all of them are handled by a dedicated Ethernet port, separate from the plant network.
Count the network ports too: one for the plant network, one for the cameras (with PoE if there are any) and one for the fieldbus. Asking for them as standard avoids USB adapters that end up loose inside the cabinet.
The environment: dust, vibration and temperature
A closed cabinet builds up heat and a machine transmits vibration. Ask for the temperature range your machine needs and require that the unit has passed it in a test, not just on a datasheet. For vibration and shock, MIL-STD-810H tests are the reference we use in our industrial range.
Lifecycle: the same computer in unit one and unit one hundred
If the computer is part of your machine, every part change is a revalidation. Ask for a frozen platform with a multi-year commitment, advance notice when a part is about to be discontinued and an agreed last-time buy. Ask also for your system image to be loaded and for every unit to ship with its serial number and test report.
That is exactly what our OEM programme covers: validated platform, imaging and serialisation, a 24-hour test per unit and immediate replacement during the warranty.
Indicative starting points
| Case | Form factor | Starting point |
|---|---|---|
| Process control, data logging, HMI | Fanless box PC on a DIN rail | Low-power processor, 16 GB, industrial SSD, 24 V, 2 Ethernet ports |
| Operator in front of the machine | Touch panel PC with IP65 front | The same, with a 15 to 21-inch screen and automatic start |
| Inspection with deep learning | Compact unit with a GPU | 16 to 24 GB GPU, 32 to 64 GB of memory, PoE ports for the cameras |
| In-line simulation or several GPUs | Tower in the control cabinet | Workstation with ECC memory and a redundant power supply if downtime costs money |
Related hardware and guides
Frequently asked questions
Box PC or panel PC?
If nobody works in front of the machine, a box PC in the cabinet: it is cheaper, easier to cool and the screen, if needed, goes separately. If the operator runs the machine from the front, a panel PC with IP protection on the visible face.
Can it run on 24 V directly?
Yes. Industrial units accept a wide DC range, usually 9 to 36 V, and start on their own when power returns. Ask for it explicitly: an office PC with an adapter is not the same thing.
How does it connect to the PLC?
Through digital inputs and outputs for simple signals, or through the machine bus (Profinet, EtherNet/IP, Modbus TCP, OPC UA) over a dedicated Ethernet port. If the software needs it, an I/O card or a fieldbus module is added.
How many years can you keep the same platform?
We work with industrial platforms with multi-year availability commitments and give advance notice when a part is about to be discontinued, to agree a last-time buy or a validated replacement.
Tell us about your product
Tell us what it does, where it will work and how many units a year. We will propose the machine, the lead time and the price in writing within 12 working hours.