Home
Hardware
Configurator
Services
OEM Guides About us Warranty Contact
ESENDEFRITPT
On-board · Aircraft and drones

Computer for light aircraft, drones and ground stations: weight, DO-160 and cooling

In the air every gram counts, cool air is scarce and nothing may fail. This guide separates what goes on board (the minimum, sealed and tested) from what stays on the ground (the power) and explains what to ask for in each case.

ACD&CO technical team7 November 20267 min read

What goes on board and what stays on the ground

On board goes the essential: sensor and camera capture, control and, if decisions must be made in flight, the inference of a small model. Heavy processing (photogrammetry, training, analysis of hours of video) stays in the ground station, where there is space, energy and a workstation. Splitting it this way cuts weight on board and risk.

Weight, volume and power

An on-board unit is chosen by watts and grams: an embedded compute module of 10 to 30 W, with a housing that dissipates by conduction, weighs a few hundred grams. On light aircraft the power is usually 28 V DC and on drones it comes from the propulsion battery or an auxiliary one; in both cases the unit must accept a wide range, filter transients and start on its own.

DO-160: the tests for aircraft equipment

If the unit is installed in a certified aircraft, whoever is responsible for the installation will require tests to RTCA DO-160: temperature and altitude, vibration, shock, humidity, electromagnetic compatibility and discharges, in the categories set by the aircraft. On drones and experimental aircraft it is not required, but the same tests (or those of MIL-STD-810H) are how you know the unit will hold up.

DO-160 tests are carried out by an accredited laboratory on the final installed unit. Our part is to choose a platform that can pass them and to test it in our laboratory first.

Fanless cooling

At altitude the air is thinner and cools less, and a fan is one more moving part that can fail. On-board units dissipate by conduction to the housing or a cold plate, which forces low-power processors and limits GPU power. If video or inference must be processed on board, a module with an integrated GPU of 15 to 40 W is the practical limit.

The ground station

On the ground you want the opposite: power. A rugged case with a compact unit or an industrial laptop, a sunlight-readable screen, batteries or vehicle power, and the data links (radio, 4G or 5G, satellite). If photogrammetry or video review happens in the field, a dedicated GPU; if processing happens later in the office, a workstation with plenty of memory and fast drives.

Starting points for the air and for the ground
WhereCaseStarting point
On boardCapture and control10 to 20 W embedded module, fanless, 28 V or battery, industrial SSD
On boardIn-flight inference (detection, tracking)Module with a 15 to 40 W integrated GPU, conduction cooling
Ground, in the fieldControl, links and video reviewCompact unit in a rugged case or industrial laptop, outdoor screen
Ground, in the officePhotogrammetry and analysisWorkstation with 64 to 128 GB, 16 to 32 GB GPU and fast NVMe

Frequently asked questions

How much does an on-board computer weigh?

An embedded compute module with its conduction housing weighs between two hundred and eight hundred grams depending on power. That is the reference for large drones and light aircraft.

Do you have DO-160 certified units?

DO-160 tests are performed on the final installed unit, in an accredited laboratory and in the aircraft’s categories. We choose the platform that can pass them and test it first in our laboratory, with the report for the certifier.

Can a drone run artificial intelligence in flight?

Yes, with a module that integrates a low-power GPU: on-board object detection and tracking are common. Training and photogrammetry are done on the ground.

What does the ground station need?

A rugged or cased unit, with a sunlight-readable screen, battery life and the data links. And, in the office, a workstation for the heavy processing. We size it together with the on-board unit.

Where will your computer work?

Tell us the location, the power available and what it has to do. We will propose the compact unit, with tests and a price, within 12 working hours.

Ask for a proposal

A proposal within 12 working hours

Tell us what you need

Tell us what it is for and we will reply with a configuration and its price. If you already have a quote from another brand, send it over and we will prepare the equivalent.

  • A written reply within 12 working hours
  • A single point of contact, from quote to warranty
  • No obligation: we only use your details to reply

+34 613 17 68 06info@acdcompany.es

This field is required.
Check the email: something is missing.

Or call us: +34 613 17 68 06