Home
Hardware
Configurator
Services
OEM Guides About us Warranty Contact
ESENDEFRITPT
Workstations · Geomatics

Photogrammetry, GIS and point cloud workstation: what each stage of the work asks for

A photogrammetry project goes through stages that ask for different things: many cores to align, a lot of memory for the dense cloud, a GPU to mesh and fast drives to move tens of gigabytes. This guide splits the budget between those parts according to the size of your projects.

ACD&CO technical team7 November 20267 min read

What each stage asks for

Photo alignment scales with processor cores. The dense cloud and meshing run on the GPU (CUDA in Metashape, RealityCapture and Pix4D) and need system memory to hold the whole project. Texturing uses GPU and disk. And GIS work (QGIS, ArcGIS Pro) prefers a fast core, plenty of memory and a drive that reads layers and rasters quickly.

Processor: cores to align, clock speed for GIS

For projects of up to a few thousand photos, a 16-core Ryzen 9 aligns quickly and is the fastest in GIS, which barely uses several cores. For projects of tens of thousands of photos or LiDAR clouds of billions of points, a Threadripper brings more cores and, above all, the memory channels those volumes demand.

Memory and GPU

As a guide, 64 GB for projects of up to two or three thousand photos, 128 GB for large projects and LiDAR point clouds, and 256 GB for whole cities or blocks of many flights. The GPU, 16 GB to start (RTX 5070 Ti or 5080) and 32 GB (RTX 5090 or RTX PRO 4500) for very dense meshes; photogrammetry software uses CUDA, so NVIDIA.

If you capture drone photos in the field and process in the office, see also the guide on computers for drones and ground stations: the workstation in this guide is the office ground station.

Drives: where time is lost without noticing

A drone flight is tens of gigabytes of photos and the processed project, several times more. A 2 to 4 TB NVMe for the current project, another for the system and the software, and 8 or 16 TB drives (or a server) for the archive. Copying a 200 GB project from a slow drive takes longer than aligning it.

Three configurations for photogrammetry and GIS (excluding VAT)
ProjectsWorkstationPrice
Up to a few thousand photos, daily GISCreative Pro: 16-core Ryzen 9, 64 GB, RTX 5070 Ti, 2 TB + 4 TB NVMe€5,280
Large projects, point clouds, two 4K monitorsPro: 16-core Ryzen 9, 64 GB ECC, RTX 5080, 2 TB + 4 TB NVMe€6,770
Tens of thousands of photos, city-scale LiDARAdvanced Plus: 32-core Threadripper, 128 GB ECC, RTX 5080, 2 TB + 4 TB NVMe€14,265

Notes by program

RealityCapture and Metashape scale well with the GPU and with cores; Metashape also uses several GPUs if present. Pix4D is similar and asks for a lot of memory when meshing. QGIS and ArcGIS Pro rely on a fast core, memory and disk; ArcGIS Pro accelerates some tools with the GPU. CloudCompare and LiDAR viewers load the whole cloud into memory: allow a gigabyte per hundred million points, with headroom.

Frequently asked questions

GeForce or RTX PRO for photogrammetry?

Photogrammetry software uses CUDA and a GeForce performs very well. An RTX PRO brings ECC memory and certified drivers; it pays off if the machine works for hours unattended or if you also use certified CAD.

How much memory for a LiDAR cloud?

Allow a gigabyte per hundred million points loaded, and leave headroom for the program and the layers. For clouds of a billion points, 64 GB is tight; 128 GB is reasonable.

Will a laptop do?

For GIS and small projects, yes. For dense clouds and meshing, a laptop runs out of memory and cooling after two hours. The usual setup is a laptop in the field and the workstation in the office.

Is a Threadripper worth it?

From tens of thousands of photos or city-scale point clouds, yes: more cores to align and four memory channels for the volumes. Below that, a 16-core Ryzen 9 is faster in GIS and costs less.

Shall we size your workstation?

Tell us which software you use and the size of your projects. We will propose the processor, memory, GPU and drives, with a price, within 12 working hours.

Ask for a proposal

A proposal within 12 working hours

Tell us what you need

Tell us what it is for and we will reply with a configuration and its price. If you already have a quote from another brand, send it over and we will prepare the equivalent.

  • A written reply within 12 working hours
  • A single point of contact, from quote to warranty
  • No obligation: we only use your details to reply

+34 613 17 68 06info@acdcompany.es

This field is required.
Check the email: something is missing.

Or call us: +34 613 17 68 06