Home
Hardware
Configurator
Services
OEM Guides About us Warranty Contact
ESENDEFRITPT
Workstations · NVIDIA graphics cards

RTX 5090 or RTX PRO 6000 Blackwell: which to choose for AI, rendering and CAD

Both carry the same Blackwell chip and roughly the same cores. The difference lies in memory, in what they withstand around the clock and in what they cost. This guide says when each one pays off and when the RTX PRO 5000 is the middle answer.

ACD&CO technical team7 November 20266 min read

What really changes

The RTX 5090 has 32 GB of GDDR7 memory and draws up to 575 W. The RTX PRO 6000 Blackwell has 96 GB with ECC, slightly more cores, drivers certified for professional software and two versions: the workstation edition, at 600 W, and the Max-Q, at 300 W, designed to fit several in one case. In raw compute they are close; in memory, the PRO 6000 has three times as much.

When the RTX 5090 is enough

For rendering with scenes that fit in 32 GB, for CAD and BIM, for video editing, for real-time visualisation and for artificial intelligence with medium models (up to around 30 billion parameters quantised) or fine-tuning of small models. It is the card with the best ratio of power to price for a desk that uses it now and then.

When the RTX PRO 6000 is needed

When the model does not fit: 70-billion-parameter language models at high precision, several models loaded at once, very long contexts or video generation. When the GPU works 24 hours a day: ECC memory prevents silent errors in computations that last for days. When the software demands certified drivers. And when two or three GPUs must go in one case: the 300 W Max-Q allows it without a two-kilowatt power supply.

A PRO 6000 costs as much as several 5090s. If memory is the only problem, compare first with two 5090s splitting the model, or with the 48 GB PRO 5000.

The 48 GB RTX PRO 5000, the middle ground

With 48 GB with ECC and 300 W, the RTX PRO 5000 Blackwell runs quantised 70-billion models, fits two to a normal tower and carries the same certified drivers. For many AI and simulation teams it is the sensible purchase: more memory than the 5090 without paying for the PRO 6000.

Power draw, cooling and case

A 5090 needs a 1,000 W power supply or more and three slots; two of them, a 2,000 W supply and a large case with airflow. The PRO 6000 Max-Q and the PRO 5000, at 300 W and two slots, allow two or three GPUs with a 1,600 W supply and far less noise. In a machine that works day and night, power draw is a bill too.

Our workstations by graphics card (excluding VAT)
WorkstationGPUPrice
Advanced Pro: Threadripper, 128 GB ECCRTX 5090, 32 GB€20,200
Enterprise: Threadripper PRO, 256 GB ECCRTX 5090, 32 GB, expandable to several€30,435
Enterprise Plus: Threadripper PRO, 256 GB ECC2 × RTX 5090, 64 GB in total€38,200
Enterprise Max: 96-core Threadripper PRO, 256 GB ECCRTX PRO 6000 Blackwell, 96 GB ECC€52,715

In the configurator you can swap the GPU of any of them for the RTX PRO 4500, 5000 or 6000.

Frequently asked questions

Is the RTX PRO 6000 faster than the 5090?

In raw compute they are close: the same chip and slightly more cores on the PRO. Where the PRO 6000 wins by a wide margin is when the model does not fit in 32 GB, because the 5090 has to split it or cannot run it at all.

Can I use two RTX 5090s instead of one PRO 6000?

For rendering and for models the software knows how to split, yes, and it is usually cheaper. For a single large model that needs all its memory on one card, no: the memory of two 5090s does not add up automatically.

What is the Max-Q version?

The same RTX PRO 6000 with power capped at 300 W and blower cooling, designed to fit two, three or four in one case. It performs slightly below the 600 W version, but allows more GPUs with a smaller power supply and less noise.

And the RTX PRO 5000?

With 48 GB with ECC and 300 W, it is the middle ground: it runs quantised 70-billion models, takes two in a normal tower and costs considerably less than the PRO 6000. For many AI teams it is the sensible purchase.

Shall we size your workstation?

Tell us which software you use and the size of your projects. We will propose the processor, memory, GPU and drives, with a price, within 12 working hours.

Ask for a proposal

A proposal within 12 working hours

Tell us what you need

Tell us what it is for and we will reply with a configuration and its price. If you already have a quote from another brand, send it over and we will prepare the equivalent.

  • A written reply within 12 working hours
  • A single point of contact, from quote to warranty
  • No obligation: we only use your details to reply

+34 613 17 68 06info@acdcompany.es

This field is required.
Check the email: something is missing.

Or call us: +34 613 17 68 06